Mouse Sensitivity Calculator
Changing your mouse DPI or moving to a different game can make a familiar sensitivity feel unfamiliar. The Mouse Sensitivity Calculator helps you find a target in-game sensitivity that preserves the same horizontal rotation for a given distance of physical mouse movement.
The calculation uses your current and target DPI settings along with each game’s yaw value. It is useful when you want a consistent starting point across setups, although differences between games can still affect how aiming feels.
What the Mouse Sensitivity Calculator does
The Mouse Sensitivity Calculator converts a current in-game sensitivity into a Target Sensitivity for a different mouse DPI, a different game, or both. It matches the number of degrees your view rotates horizontally when you move the mouse one inch.
For example, if you double your DPI while keeping the same game and yaw value, the calculator halves your in-game sensitivity. Under the calculator’s assumptions, a mouse movement of the same physical distance will produce the same horizontal rotation.
The calculator uses five inputs:
- Current mouse DPI: Your existing mouse setting, measured in counts per inch.
- Current in-game sensitivity: The sensitivity value you currently use in the source game.
- Current game yaw: The source game’s horizontal rotation coefficient, expressed in degrees per mouse count per sensitivity unit.
- Target mouse DPI: The DPI setting you plan to use with the converted sensitivity.
- Target game yaw: The target game’s horizontal rotation coefficient, in the same units as the current game yaw.
The displayed default yaw values are illustrative assumptions, not universal values or recommendations. Check the yaw values for the games and settings you intend to compare. Games can use different sensitivity scales and may apply additional multipliers.
How to use the Mouse Sensitivity Calculator
- Enter your current mouse DPI. Use the DPI setting active when you play with your existing sensitivity. The calculator accepts values from 100 to 30,000 counts per inch.
- Enter your current in-game sensitivity. Use the numerical value from your current game. The accepted range is 0.01 to 100.
- Enter the current game yaw. Supply the game’s horizontal yaw coefficient in degrees per mouse count per sensitivity unit. The accepted range is 0.001 to 1.
- Enter your target mouse DPI. This can be the same as your current DPI if you are only changing games, or a different value if you are changing your mouse setting.
- Enter the target game yaw. Use the target game’s coefficient in the same units. For a DPI change within the same game, use the same yaw value in both yaw fields if that coefficient remains unchanged.
- Read the Target Sensitivity. Enter the result in the target game, rounding it if the game supports fewer decimal places.
After applying the result, check it in a suitable practice area. A useful comparison is the physical distance needed to make a full horizontal turn. The converted number gives you a starting point, while an in-game check can reveal effects from settings the formula does not include.
How the Mouse Sensitivity Calculator formula works
The calculator equates horizontal rotation per inch in the current and target setups:
Current DPI × current sensitivity × current yaw = target DPI × target sensitivity × target yaw
Rearranging that equation gives the conversion formula:
Target Sensitivity = (current sensitivity × current DPI × current yaw) ÷ (target DPI × target yaw)
DPI represents mouse counts per inch. Multiplying it by sensitivity and yaw gives the horizontal degrees of rotation per inch under the assumed linear model. The formula chooses a target sensitivity that makes this value equal for both setups.
Worked example: changing from 800 to 1,600 DPI
Assume you use a sensitivity of 1 at 800 DPI, and both the current and target yaw values are 0.022 degrees per mouse count per sensitivity unit. These yaw values are assumptions for the example.
- Current mouse DPI: 800 counts per inch
- Current in-game sensitivity: 1
- Current game yaw: 0.022
- Target mouse DPI: 1,600 counts per inch
- Target game yaw: 0.022
Target Sensitivity = (1 × 800 × 0.022) ÷ (1,600 × 0.022) = 0.5000.
With these assumptions, both setups produce 17.6 degrees of horizontal rotation per inch. Because the DPI doubles and the yaw stays the same, the in-game sensitivity must be halved to preserve that rotation.
Use cases for the Mouse Sensitivity Calculator
Changing your mouse DPI
If you switch DPI settings on your gaming mouse, the calculator can help you adjust your in-game sensitivity to maintain the same horizontal rotation per inch. Enter the same yaw value in both yaw fields when the game’s yaw coefficient remains unchanged.
Moving between games
Two games may use different sensitivity scales, so copying the same number into each game does not necessarily produce the same rotation. Enter the appropriate yaw coefficient for each game and use the result as a starting point in the target game.
Changing mice or profiles
A new mouse or a different onboard profile may use a DPI setting that differs from your old setup. The calculator lets you account for that change while keeping your preferred horizontal movement ratio as close as the formula allows.
Comparing a desktop and laptop setup
If you play on multiple PCs with different mouse DPI profiles, you can calculate a corresponding sensitivity for each setup. Record the DPI, sensitivity, and yaw assumptions you used so that you can reproduce the conversion later.
Other factors to consider when calculating Target Sensitivity
Mouse acceleration and modifiers: The formula assumes sensitivity and yaw are applied linearly, with acceleration and other modifiers disabled or equivalent across the two setups. Acceleration changes the relationship between physical movement and rotation, so one sensitivity value may not match at every mouse speed.
Field of view: Matching horizontal rotation per inch does not account for field of view. Even if a given mouse movement turns the camera through the same number of degrees, movement on the screen may look different when the field of view changes.
Scoped sensitivity: The result is for the horizontal sensitivity described by the supplied yaw values. It does not convert scoped, aim-down-sights, or other separate sensitivity settings.
Game-specific behavior: Some games use nonlinear sensitivity, extra multipliers, or settings that change the effective yaw. In those cases, the formula may not describe the complete input behavior, and a different conversion method may be needed.
Rounding: The calculator displays the result to four decimal places. If the target game accepts fewer decimal places, round to an available value and check the resulting movement. Rounding can introduce a small difference in rotation.
Input accuracy: The result depends on the DPI, sensitivity, and yaw values entered. Use the active mouse DPI profile and verify the yaw units before comparing the result with your in-game experience.
Mouse Sensitivity Calculator FAQ
What does Target Sensitivity mean?
Target Sensitivity is the calculated in-game sensitivity for your target DPI and yaw value. It is intended to preserve the same horizontal degrees of rotation per physical inch of mouse movement as your current setup, subject to the calculator’s assumptions.
Can I use the calculator for the same game?
Yes. To convert a sensitivity after changing DPI in the same game, enter the game’s yaw value in both yaw fields, provided it stays the same. Enter your old and new DPI settings in their respective fields.
Will the same sensitivity number work in every game?
Not necessarily. Games can use different sensitivity scales and yaw coefficients. The calculator accounts for the yaw values you provide, but it cannot automatically account for every game-specific modifier or nonlinear behavior.
Does this calculator convert scoped sensitivity?
No. The calculation preserves horizontal rotation using the supplied general sensitivity and yaw values. Scoped or aim-down-sights sensitivity can involve separate settings and requires its own conversion approach.
Why does my aim feel different after converting sensitivity?
Field of view, acceleration, separate aiming multipliers, rounding, and game-specific input behavior can all affect how movement feels. Verify the values you entered, then compare the physical mouse distance needed for a horizontal turn in each setup.