RAID Storage Capacity Calculator
A RAID storage capacity calculator helps you estimate how much space remains for your files after accounting for your chosen RAID level and a capacity reserve. If you are planning a desktop storage array, NAS, or home server, the estimate can help you compare drive configurations before buying or installing hardware.
The RAID Storage Capacity Calculator supports equal-size drives in RAID 0, RAID 1, RAID 5, and RAID 6. It reports Usable Capacity in decimal terabytes (TB) and applies your selected reserve after calculating the capacity available from the RAID array.
What the RAID Storage Capacity Calculator does
The calculator estimates the space available for data based on four inputs: the number of drives, the capacity of each drive, the RAID level, and the percentage of capacity you want to reserve. It accounts for the space used by mirroring or parity, depending on the RAID level you select.
For example, four 8 TB drives have a combined nominal capacity of 32 TB. In RAID 5, one drive’s worth of capacity is used for parity, leaving 24 TB before any reserve. If you reserve 10%, the calculator shows 21.60 TB of Usable Capacity.
The result is a planning estimate. Formatting and filesystem overhead are not included, so the capacity available to store files may be lower. The calculator also assumes that all drives have the same nominal capacity.
How to use the RAID Storage Capacity Calculator
- Enter the number of drives. Choose from 1 to 100 drives. Each RAID level has its own minimum drive count.
- Enter the capacity per drive in TB. Use the nominal decimal capacity of one drive, from 0.1 TB to 100 TB. The calculator assumes every drive has that same capacity.
- Select a RAID level. Choose RAID 0, RAID 1, RAID 5, or RAID 6. Each option allocates capacity differently.
- Set the capacity reserved. Enter a percentage from 0% to 100%. This represents the portion of the RAID capacity you want to exclude from the usable estimate.
- Review Usable Capacity. The result is displayed in TB to two decimal places.
Use a 0% reserve if you want to see the estimated RAID capacity before setting space aside. A larger reserve produces a lower result and can be useful when planning room for future files or operational needs. The appropriate reserve depends on your workload and storage system.
How the RAID Storage Capacity Calculator formula works
The calculator first determines how many drives’ worth of capacity are available for data. It then multiplies that amount by the capacity per drive and applies the remaining percentage after the reserve:
Usable Capacity = data-equivalent drives × capacity per drive × (1 − reserve percentage ÷ 100)
The number of data-equivalent drives depends on the selected RAID level:
- RAID 0: All drives contribute capacity. The calculation is the number of drives multiplied by the capacity per drive. The calculator accepts at least one drive for this estimate.
- RAID 1: All drives are treated as a single mirrored set containing the same data. Usable capacity before reserve equals one drive’s capacity. At least two drives are required.
- RAID 5: One drive’s worth of capacity is allocated to parity. Usable capacity before reserve equals the number of drives minus one, multiplied by the capacity per drive. At least three drives are required.
- RAID 6: Two drives’ worth of capacity are allocated to parity. Usable capacity before reserve equals the number of drives minus two, multiplied by the capacity per drive. At least four drives are required.
For RAID 5 and RAID 6, parity information is distributed across the array; the calculator expresses its capacity cost as one or two drives’ worth. If the number of drives is below the selected level’s minimum, the result is 0.00 TB. A 100% reserve also produces a zero result.
Worked example: four 8 TB drives in RAID 5
Assume you have four equal-size drives, each with a nominal capacity of 8 TB, and you want to reserve 10% of the RAID capacity:
- RAID 5 uses one drive’s worth of capacity for parity: 4 − 1 = 3 data-equivalent drives.
- Multiply by the capacity per drive: 3 × 8 TB = 24 TB.
- Apply the 10% reserve: 24 TB × 0.90 = 21.60 TB.
In this example, the reserve excludes 2.40 TB from the 24 TB calculated before reserve. The result does not subtract formatting or filesystem overhead.
Use cases for the RAID Storage Capacity Calculator
Planning a home NAS: Compare RAID 5 and RAID 6 using the same number of equal-size drives. This helps you see the capacity cost of the additional parity in RAID 6 when deciding how much storage your NAS needs.
Comparing RAID 0 and RAID 1: See how striping and mirroring affect capacity. RAID 0 uses all entered drive capacity in this calculation, while RAID 1 provides one drive’s capacity for a single mirrored set. RAID 0 provides no drive-failure redundancy, so capacity should be considered alongside your tolerance for data loss.
Estimating space for a media library: Enter the drives you plan to use and leave a reserve for future additions. Compare the result with the size of your existing files, keeping in mind that the actual filesystem may report less space.
Checking whether a drive count meets the minimum: If you are considering a small array, the zero result can flag a configuration with too few drives. For example, three 10 TB drives in RAID 6 return 0.00 TB because this calculator requires at least four drives for RAID 6.
Comparing reserve assumptions: Change only the reserved percentage to see how much capacity you would set aside. For example, five 2 TB drives in RAID 0 provide 10 TB before reserve. With a 20% reserve, the result is 8.00 TB.
Other factors to consider when calculating Usable Capacity
Decimal TB and binary units: Drive manufacturers commonly describe capacity in decimal TB, where 1 TB equals one trillion bytes. Some operating systems display capacity using binary units, often called tebibytes (TiB). A number shown in TiB will be smaller than the decimal TB figure for the same number of bytes. This calculator does not convert its result to TiB.
Formatting and filesystem overhead: A filesystem needs space for its own structures and metadata. The calculator does not deduct that space, so its result should not be treated as the exact free-space figure you will see after setting up the array.
Equal-size drive assumption: The calculator uses one capacity value for every drive. Mixed-size drives are not modeled, and their usable capacity can depend on the RAID implementation. Check your storage system’s documentation when planning an array with different drive sizes.
Hot spares and nested RAID: The estimate does not account for a drive designated as a hot spare or for nested configurations such as RAID 10. If a drive will serve as a spare rather than as an active array member, this calculator does not model that arrangement directly.
Hardware and software differences: Controllers, NAS operating systems, and software RAID implementations may have their own requirements or reserve additional space. Confirm the supported drive count and expected capacity with the documentation for your specific system.
Redundancy and backups: RAID 1, RAID 5, and RAID 6 provide different levels of drive-failure tolerance, but RAID is not a substitute for a separate backup. Accidental deletion, corruption, theft, or damage can still affect data on an array.
RAID Storage Capacity Calculator FAQ
How many drives do I need for RAID 5 or RAID 6?
This calculator requires at least three drives for RAID 5 and four drives for RAID 6. Entering fewer drives for either level returns 0.00 TB.
Why does RAID 1 show the capacity of only one drive?
The calculator assumes every drive in the RAID 1 array mirrors the same data. Under that assumption, a set of two or more equal-size drives has the capacity of one drive before the reserve is applied.
What does the capacity reserve percentage mean?
It is the percentage of calculated RAID capacity you choose to exclude from the result. The reserve is applied after mirroring or parity is accounted for. For example, a 10% reserve leaves 90% of the calculated RAID capacity in the Usable Capacity estimate.
Why might my computer show less capacity than the calculator?
The result uses decimal TB and does not subtract formatting or filesystem overhead. Your operating system may also display capacity in binary units, which produce a smaller numerical value for the same amount of storage.
Does RAID protect my files from every kind of data loss?
No. RAID levels with redundancy can help an array tolerate certain drive failures, but they do not protect against every cause of data loss. Keep separate backups appropriate to the value of your files.