NAS Storage Calculator

NAS Storage Calculator

Estimate usable NAS capacity from equal-sized drives, RAID parity, and an allowance for formatting and filesystem overhead. Results are in decimal TB; actual capacity varies by system. RAID 0 has no drive-failure protection. Defaults are illustrative.
Estimated usable capacity:
Support this tool
Buy us a coffee
If this NAS Storage Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

What the NAS Storage Calculator does

The NAS Storage Calculator estimates how much usable storage you may have after combining equal-sized drives in a network-attached storage device. It starts with the advertised capacity of your drives, accounts for the selected RAID configuration, and applies an allowance for formatting and filesystem overhead.

The result, labeled Estimated usable capacity, is shown in decimal terabytes (TB) to two decimal places. It is a planning estimate: the capacity reported by your NAS may differ because storage systems use different filesystems, reserved space, and volume layouts.

For readers of bestpcaccessories.com, a NAS storage calculator can help answer a practical question before buying drives: how much space will remain for files after the selected RAID configuration and overhead allowance? You can also compare configurations to see the capacity trade-off between RAID 0, RAID 5, and RAID 6.

The calculator assumes that every drive has the same advertised capacity. Its default values are illustrative, and the overhead percentage is an adjustable assumption rather than a fixed requirement for every NAS.

How to use the NAS Storage Calculator

Enter the details of the drive array you want to estimate:

  1. Number of drives: Enter the number of equal-sized drives in the array. The calculator accepts 4 to 24 drives.
  2. Capacity per drive (TB): Enter the advertised decimal capacity of one drive, from 1 TB to 40 TB. Use the same capacity for every drive in your calculation.
  3. RAID configuration: Choose RAID 0, RAID 5, or RAID 6. The calculator subtracts the equivalent capacity of zero, one, or two drives, respectively.
  4. Formatting and filesystem overhead (%): Enter an assumed allowance from 0% to 20%. The calculator applies this percentage after accounting for RAID parity.

Read the Estimated usable capacity in decimal TB. To compare options, change one input at a time. For example, keep the number and size of drives the same while switching from RAID 5 to RAID 6 to see how the additional parity allowance affects capacity.

Use an overhead assumption that makes sense for your planning, and check your NAS manufacturer’s documentation for a more specific estimate. A 10% allowance is used in the illustrative defaults, but actual overhead varies by system and setup.

How the NAS Storage Calculator formula works

The calculator uses this formula:

Estimated usable capacity = (Number of drives − parity-drive equivalent) × Capacity per drive × (1 − overhead percentage ÷ 100)

The parity-drive equivalent depends on the selected RAID configuration:

  • RAID 0: 0 drives of capacity are deducted for parity.
  • RAID 5: 1 drive’s capacity is deducted for parity.
  • RAID 6: 2 drives’ worth of capacity are deducted for parity.

These are capacity equivalents. In RAID 5 and RAID 6, parity information is distributed across the array rather than necessarily being stored on dedicated parity drives.

Worked example: four 8 TB drives

Suppose you use the calculator’s illustrative default inputs: four drives, each with an advertised capacity of 8 TB, RAID 0, and a 10% overhead allowance. Assuming the first RAID option is selected, the calculation is:

  1. Subtract the RAID 0 parity equivalent: 4 − 0 = 4 drives.
  2. Multiply by the capacity per drive: 4 × 8 TB = 32 TB.
  3. Apply the assumed 10% overhead: 32 TB × 0.90 = 28.80 TB.

The estimated usable capacity is therefore 28.80 TB. This result does not mean RAID 0 provides drive-failure protection: it does not. If a drive fails, the array’s data can be lost.

As another example, six 10 TB drives in RAID 6 with an assumed 5% overhead produce (6 − 2) × 10 × 0.95, or 38.00 TB. The example illustrates how two drive-equivalents of capacity are allocated to parity before the overhead allowance is applied.

Use cases for the NAS Storage Calculator

Planning a home media library: Photos, video recordings, and large media files can fill a NAS quickly. Estimate capacity before purchasing drives, then leave room for the library to grow.

Comparing RAID choices: Enter the same drive count and drive capacity for each RAID option. RAID 0 gives the highest estimate because it has no parity deduction, while RAID 5 and RAID 6 reserve the equivalent of one and two drives for parity. The capacity difference is only one part of choosing a configuration; consider your protection needs as well.

Estimating storage for a home office: A NAS can hold shared documents, project files, and local copies of computer backups. Compare the estimate with the amount of data you expect to store, including room for future files and backup versions.

Comparing drive sizes: Keep the drive count and RAID configuration constant, then change the capacity per drive. This helps you understand how much estimated usable space a larger set of equal-sized drives could provide.

Planning an array with more drives: If your NAS supports additional drive bays, adjust the number of drives to estimate a prospective configuration. Confirm the device’s drive, volume, and expansion limits before relying on the result.

Other factors to consider when calculating Estimated usable capacity

Decimal TB and TiB: Drive manufacturers commonly advertise capacity in decimal TB, where 1 TB equals 1 trillion bytes. Some operating systems report capacity using binary units, where 1 TiB equals 1,099,511,627,776 bytes. As a result, the same storage can appear as a smaller number in TiB even before other differences are considered.

Overhead varies: Formatting, filesystem metadata, and system reservations can affect the space available to you. The percentage entered here is a simple planning allowance, not a measurement or a universal filesystem requirement. Your NAS may report a different result.

RAID protection differs: RAID 0 offers no drive-failure protection. A correctly configured RAID 5 array is designed to tolerate one drive failure, while RAID 6 is designed to tolerate two. Failure tolerance does not guarantee recovery from every problem, and rebuilding an array can take time.

RAID is not a backup: Parity does not protect against every cause of data loss, such as accidental deletion, malware, theft, or damage to the NAS. Keep separate backups appropriate to the value of your files and check that you can restore them.

Other space requirements: This estimate does not account for hot spares, snapshots, existing data, mixed drive sizes, or vendor-specific storage layouts. Snapshots and backup versions can consume space over time, so the calculated result should not be treated as the amount available for new files in an existing system.

Future growth: An array that fits today’s files may become crowded as your media library, computer backups, and shared folders grow. Consider how quickly your data is increasing and leave a practical margin when choosing capacity.

NAS Storage Calculator FAQ

How much usable space do four 8 TB drives provide?

With RAID 0 and an assumed 10% overhead, the calculator estimates 28.80 TB. With the same drives and overhead assumption, RAID 5 estimates 21.60 TB and RAID 6 estimates 14.40 TB. These are decimal TB estimates, and actual results depend on your NAS setup.

Why does RAID 5 reduce the capacity estimate?

RAID 5 uses the equivalent capacity of one drive for distributed parity information. The calculator therefore subtracts one drive-equivalent before applying the overhead allowance. RAID 5 is designed to tolerate one drive failure, but it should still be paired with separate backups.

Should I enter 0% for formatting and filesystem overhead?

You can enter 0% to see the capacity estimate without an overhead allowance, but that does not mean your NAS will have no overhead. Use a percentage as a planning assumption and consult your system’s documentation for details that apply to its filesystem and configuration.

Can I use the calculator for drives of different sizes?

The formula assumes equal-sized drives, so it does not directly model an array with mixed capacities. Mixed-drive behavior depends on the RAID type and the NAS vendor’s storage layout. Check the vendor’s guidance for a more accurate estimate.

Does estimated usable capacity include space for snapshots and backups?

No. The result applies the chosen RAID parity equivalent and overhead allowance, but it does not separately calculate snapshots, existing data, or backup versions. Account for those needs when deciding how much storage to purchase.

Table of contents