Display Bandwidth Calculator

Display Bandwidth Calculator

Estimate the bandwidth required for uncompressed video from the active resolution, refresh rate, color depth, and an assumed overhead multiplier. The default overhead is illustrative; actual link requirements depend on timing, encoding, chroma subsampling, compression, and the display interface.
Estimated Bandwidth:
Support this tool
Buy us a coffee
If this Display Bandwidth Calculator helped you, you can support the site with a small donation. It keeps the tools on the site free and supports ongoing improvements.
Buy us a coffee
Secure donation via Gumroad

A high-resolution monitor can display more detail, but it also needs more video data to reach the screen. The Display Bandwidth Calculator estimates the data rate for uncompressed video based on resolution, refresh rate, color depth, and an optional overhead assumption. It gives readers of bestpcaccessories.com a useful starting point when comparing display settings and planning a monitor setup.

What the Display Bandwidth Calculator does

The calculator estimates bandwidth in gigabits per second (Gbps). It starts with the number of active pixels displayed in each frame, multiplies that by the number of frames sent each second, and then accounts for the selected number of bits used to represent each pixel.

You can also choose an overhead assumption. This adds an illustrative allowance for data beyond the active image. The default is 20% illustrative overhead, but you can select 25% or calculate active video alone with no added overhead.

The result is an estimate, not a compatibility verdict. Actual requirements depend on display timing, link encoding, the interface, and other settings. Compression and chroma subsampling are not modeled by this calculator.

How to use the Display Bandwidth Calculator

Enter the display settings you want to estimate, then read the Estimated Bandwidth result. The calculator displays the answer in Gbps, rounded to two decimal places.

  1. Enter the horizontal resolution. This is the number of active pixels across the screen. For example, a 1920 × 1080 display has a horizontal resolution of 1920 pixels.
  2. Enter the vertical resolution. This is the number of active pixels from top to bottom. For the same 1920 × 1080 display, enter 1080 pixels.
  3. Enter the refresh rate. Use the rate in hertz (Hz). A setting of 60 Hz represents 60 frames per second in this calculation.
  4. Select the uncompressed color depth. The available choices are 16, 24, 30, and 36 bits per pixel. For RGB video, 24 bits per pixel corresponds to 8 bits per color channel, 30 corresponds to 10 bits per channel, and 36 corresponds to 12 bits per channel.
  5. Choose a timing and link overhead assumption. Select none for active video only, or add an illustrative 20% or 25% allowance.

The default settings are 1920 × 1080 at 60 Hz, with 24 bits per pixel and 20% illustrative overhead. These produce an estimated bandwidth of 3.58 Gbps.

How the Display Bandwidth Calculator formula works

The formula multiplies the active resolution by the refresh rate and color depth. It then applies the selected overhead multiplier and converts bits per second to decimal Gbps:

Estimated Bandwidth = horizontal pixels × vertical pixels × refresh rate × bits per pixel × overhead multiplier ÷ 1,000,000,000

The overhead multiplier is 1 when you select none, 1.2 for the illustrative 20% option, and 1.25 for the illustrative 25% option. These are assumptions used for estimation; they are not specifications for a particular cable or display interface.

Here is the calculation using the default settings:

  • Active pixels per frame: 1920 × 1080 = 2,073,600 pixels
  • Active pixels per second: 2,073,600 × 60 = 124,416,000 pixels
  • Active video data rate: 124,416,000 × 24 = 2,985,984,000 bits per second
  • With the assumed 20% overhead: 2,985,984,000 × 1.2 = 3,583,180,800 bits per second
  • Converted to decimal Gbps: 3,583,180,800 ÷ 1,000,000,000 = 3.5831808 Gbps

Rounded to two decimal places, the displayed result is 3.58 Gbps. If you select no overhead while keeping the other inputs the same, the calculation covers active video only and displays approximately 2.99 Gbps.

Use cases for the Display Bandwidth Calculator

Comparing monitor resolutions: If you are considering a higher-resolution monitor, enter its horizontal and vertical pixel counts to see how the estimated data rate changes. Keep the refresh rate, color depth, and overhead assumption the same to make the comparison easier to interpret.

Evaluating refresh rate choices: Higher refresh rates send more frames each second. With all other inputs unchanged, doubling the refresh rate doubles the estimate. This can help you understand why a high-refresh gaming monitor may place greater demands on a display connection than the same resolution at a lower refresh rate.

Exploring color depth: Changing from 24 to 30 bits per pixel increases the active video data rate by 25%, assuming the same resolution and refresh rate. This comparison can be useful when reviewing display settings that offer different color depths.

Planning a PC accessory setup: Use the estimate as an initial reference when reviewing the specifications of a monitor, graphics card, dock, or adapter. Then check the supported resolution, refresh rate, color format, and connection requirements for the actual devices you intend to use.

Comparing combinations: The tool can show how resolution, refresh rate, and color depth work together. For example, an assumed 3840 × 2160 signal at 144 Hz and 30 bits per pixel, with 25% illustrative overhead, produces 44.79 Gbps. That figure is an estimate under those inputs and assumptions, not a guarantee that a particular connection supports the mode.

Other factors to consider when calculating Estimated Bandwidth

Display timing and blanking: The active resolution describes the visible image, but a video signal can include additional timing intervals. Their size depends on the timing used. The overhead choices offer a rough allowance rather than a calculation of a specific timing standard.

Link encoding: Interfaces can add their own encoding overhead. Actual requirements vary by interface and operating mode, so a single multiplier cannot capture every connection. Take care when comparing the calculator result with a published interface rate: the specification may refer to a different measure of capacity than the estimated video data rate.

Compression: Some display connections support compression to carry demanding video modes. This calculator assumes uncompressed video and does not estimate a compressed signal. A setup that uses compression can have different link requirements from the displayed result.

Chroma subsampling: Some video formats reduce color information to lower data requirements. The calculator uses the selected total bits per pixel and does not model chroma subsampling. For the labeled RGB options, use the specified bits per pixel rather than treating bits per color channel as the total.

Compatibility across the whole connection: The monitor, graphics source, cable, and any dock or adapter must support the desired mode together. A bandwidth estimate alone cannot confirm that a particular combination will work. Check the manufacturers’ specifications for the exact resolution, refresh rate, color settings, and features you plan to use.

Rounding: The calculator displays two decimal places. Small differences may be hidden by rounding, especially at lower data rates. It uses decimal Gbps, where 1 Gbps equals 1,000,000,000 bits per second.

Display Bandwidth Calculator FAQ

What is display bandwidth?

Display bandwidth is the rate at which video data must be carried to a display, usually expressed in Gbps. The required rate depends on the video mode and how the signal is transmitted.

Does a higher refresh rate require more bandwidth?

Yes, when resolution and bits per pixel stay the same. A higher refresh rate means more frames per second, so the active video data rate rises in direct proportion to the refresh rate.

Is 24-bit color the same as 8-bit color?

For the RGB option in this calculator, 24 bits per pixel means 8 bits for each of the three color channels. The calculator needs the total bits per pixel, so select the 24-bit option for that setting.

Should I select 20% or 25% overhead?

Both are illustrative assumptions. The 20% option is the default, while 25% gives a larger allowance. Neither establishes the actual overhead for your display interface or timing. Select none if you want to estimate the active video data rate alone.

Can the result tell me whether my cable supports my monitor?

No. The result helps you understand the approximate data rate, but cable and port compatibility depend on the complete connection and the supported display mode. Check the specifications for your monitor, graphics source, cable, and any devices between them.

Table of contents